ZQ-04 microcomputer computerized lubricating machine, ZQ coating rail lubricating device 6 point kind, fastened time / ration / mounted position lubricating.
Fastened time : the smooth procedure of the machine, will influence the generation expenses of enterprises.
In buy to lessen fault and pause, must do a very good job of typical servicing.This device is geared up with “timing system”, which is managed by a contact switch of injection seat and can be started or stopped synchronously with the conveyor belt.According to the gear functioning hrs , established the lubricating cycle.
Ration: each and every of the mechanical equipment of the friction stage or surface area, needed sum of lubricant is distinct.Considerably less lubricant will lead to Insufficient lubrication, much more lubricant will squander, and even result in pollution.
The equipment has 6 lubricant outlet, every single 1 with the single output, and with an independent lubricant volume adjustment knob.
Fixed position lubricating: The lubrication level on the conveyor belt is ball, shoot nail and website link stage.For each level of the lubrication gap is quite tiny.For giving lubricant to every single point, the machine except the” touch switch “, also power to fastened point lubricating .If the lubricant outlet is not close to the lubrication position, the area is also tiny so need to have pressure to fixed position lubricating.Consequently, this device is equipped with a wind speed adjustment knob to modify the strain, in buy to achieve the complete regular of “mounted level lubricating”.
Standard set up technique
1.Resolve the machine on the chain observe, every single spray position need to be set up on the track corresponding to the chain sprocket bearing, then, install the proximity swap on the track vertical wheel.
two.Electrical power on (AC 220V)
three.Hook up to the Air hose(8 mm)