Cast Iron Timing Sprocket and Aluminum Timing Pulley Bar Stock

Cast Iron Timing Sprocket and Aluminum Timing Pulley Bar Stock

Ubet CZPT gives a extensive range of high quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. CZPT and non-common pulleys in accordance to drawings are CZPT.

 
Varieties of content:
  one. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Steel Timing Pulley
  3. GG25 HT250 Cast Iron Timing Pulley
  four. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other substance on demand, this kind of as cooper, bronze and plastic
 
Types of area remedy
 1.  Anodized surface area -Aluminum Pulleys
 2.  Hard anodized surface area — Aluminum Pulleys
 3.  Black Oxidized surface area — Steel Pulleys
 4. Zinc plated surface — Steel Pulleys
 5. Chromate surface area — Steel Pulleys Cast Iron Pulleys
 6. Nickel plated surface area –Metal Pulleys Forged Iron Pulleys
 
Varieties of teeth profile

Enamel Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(two.032MM)
XL one/5″(five.08MM)
L 3/8″(nine.525MM)
H one/two”(12.7MM)
XH 7/eight”(22.225MM)
XXH 1 one/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Types of pitches and measurements

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt tooth quantity from sixteen to 72
2.  Pilot Bore XL037 for 9.53mm timing belt tooth number from ten to seventy two
three.  Pilot Bore, Taper Bore L050 for twelve.7mm timing belt teeth number from ten to one hundred twenty
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt teeth quantity from 10 to one hundred twenty
5.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt enamel variety from ten to 120
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt tooth number from 14 to 50
seven.  Pilot Bore, Taper Bore H100 for twenty five.4mm timing belt tooth variety from 14 to 156
eight.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt tooth quantity from fourteen to 156
9.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt teeth number from 14 to 156
10.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt tooth number from fourteen to 156
11.  Taper Bore XH200 for 50.8mm timing belt tooth variety from eighteen to 120
12.  Taper Bore XH300 for 76.2mm timing belt tooth number from eighteen to a hundred and twenty
13.  Taper Bore XH400 for one zero one.6mm timing belt teeth variety from eighteen to a hundred and twenty

Metric Timing Belt Pulley T and AT
one.  Pilot Bore T2.5-16 for 6mm timing belt tooth quantity from 12 to 60 
two.   Pilot Bore T5-21 for 10mm timing belt tooth amount from ten to 60 
3.   Pilot Bore T5-27 for 16mm timing belt enamel quantity from ten to 60 
four.   Pilot Bore T5-36 for 25mm timing belt enamel amount from 10 to 60 
5.   Pilot Bore T10-31 for 16mm timing belt enamel quantity from twelve to 60 
six.   Pilot Bore T10-40 for 25mm timing belt tooth number from 12 to 60 
seven.   Pilot Bore T10-47 for 32mm timing belt enamel variety from eighteen to 60 
8.   Pilot Bore T10-66 for 50mm timing belt tooth variety from eighteen to sixty
9.  Pilot Bore AT5-21 for 10mm timing belt tooth quantity from twelve to sixty
ten. Pilot Bore AT5-27 for 16mm timing belt enamel amount from 12 to 60
eleven. Pilot Bore AT5-36 for 25mm timing belt teeth variety from twelve to 60 
twelve. Pilot Bore AT10-31 for 16mm timing belt tooth amount from fifteen to 60 
13. Pilot Bore AT10-40 for 25mm timing belt tooth number from 15 to 60 
14. Pilot Bore AT10-47 for 32mm timing belt enamel variety from eighteen to 60 
fifteen. Pilot Bore AT10-66 for 50mm timing belt tooth variety from 18 to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
one.  HTD3M-06 3M-09 3M-15 enamel number from 10 to 72 
two.  HTD5M-09 5M-15 5M-twenty five teeth quantity from 12 to 72 
3.  HTD8M-20 8M-thirty 8M-fifty 8M-85 tooth number from 22 to 192 
four.  HTD14M-40 14M-fifty five 14M-eighty five 14M-a hundred and fifteen 14M-one hundred seventy teeth amount from 28-216 
five.  Taper Bore HTD5M-15 8M-twenty 8M-thirty 8M-fifty 8M-85 14M-40 14M-fifty five 14M-eighty five
         14M-one hundred fifteen 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-twelve PCGT8M-21 PCGT8M-36 PCGT8M-62 
2.      PCGT14M-20 PCGT14M-37 PCGT14M-68 PCGT14M-90 PCGT14M-one hundred twenty five

Energy Grip Gates Tooth/ PGGT 2GT, 3GT and 5GT 
one. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-fifteen for timing belt width 9mm and 15mm 
3. 5GT-15, 5GT-twenty five for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-15 teeth number from 10 to 72 
two.   RPP5M-09 5M-15 5M-25 teeth amount from twelve to 72 
three.   RPP8M-20 8M-30 8M-50 8M-85 teeth amount from 22 to 192 
four.   RPP14M-40 14M-55 14M-eighty five 14M-115 14M-one hundred seventy tooth variety from 28-216 
5.  Taper Bore RPP5M-fifteen 8M-twenty 8M-thirty 8M-50 8M-eighty five 14M-40 14M-55 14M-eighty five
     14M-one hundred fifteen 14M-170

Cast Iron Timing Sprocket and Aluminum Timing Pulley Bar Stock